You are visiting the Canada Kee Safety website from United States. Would you like to go to the United States site?
The Constitutional Act of 1791 divided the colony of Quebec into the colonies of Upper and Lower Canada, which coexisted with the Maritime colonies of New Brunswick, Nova Scotia, and the Island of St. John. Although a linguistic divide existed—with English predominating in the Maritimes and Upper Canada, and French in Lower Canada—all regions remained closely linked economically.
Fast-forward more than 230 years, from the bustling manufacturing, transportation, and energy hubs of Ontario and Quebec to the demanding shipyards and lumber mills of the Atlantic. The industrial base of Eastern Canada remains a tightly woven economic fabric.
These diverse industries face shared challenges of protecting workers in environments where elevated work areas, heavy equipment maintenance, and harsh coastal weather increase the risk of falls. Workplace safety in Canada must encompass a proactive, integrated approach to comprehensive fall protection systems that address both the rooftop and interior hazards.
The risks workers face are as varied as the industries themselves. On rooftops, maintenance personnel work at perilous heights, exacerbated in the winter by snow, ice, and wind. Inside the facilities, workers navigate mezzanine edges, loading docks, and large machinery. For example:
This combination of exterior and interior risks necessitates a holistic strategy that aligns with Canadian OH&S requirements and CSA-compliant fall protection standards.
Although safety is at a premium, pre-engineered, modular systems go beyond compliance and deliver solutions that bolster worker confidence, so they perform their tasks with greater precision and efficiency.
Furthermore, when these safety systems are constructed of anodized aluminum or galvanized steel, they have the strength, durability, and corrosion resistance to withstand harsh conditions—from the inside out.
For rooftop fall protection, “passive” systems provide a permanent barrier between the worker and the hazard, notably the roof edge. Where passive systems are not feasible or should be supplemented, “active” fall protection lifelines tie off workers to offer travel restraint and fall arrest.
Freestanding Perimeter Guardrail
Adaptable to virtually any flat or low-sloped rooftop, these safety railing systems feature recycled PVC counterweight bases and are installed without penetrating the roof.
Anti-Slip Rooftop Walkways
To create safe pathways along often cluttered or slippery rooftops, a walkway system establishes defined routes away from hazards and towards work areas. They feature self-draining, non-bounce, slip-resistant nylon treads and can be fitted with guardrails for added fall protection.
Transitioning to interior access safety, the same principles of compliance and ergonomics apply. Both passive and active fall protection systems have their utility.
Ground-based Guardrails
For entranceways and pedestrian paths, machine guarding, leading edges at docks, mezzanines, catwalks, production lines, and other exposed areas, safety railing systems provide versatile protection. Featuring a modular, component-based design, they are installed without welding or drilling and can be reconfigured as facility layouts and needs change.
Rigid Rail
For overhead access to vehicles, machinery, and loading/unloading, a modular rigid rail system gives workers hands-free freedom along a fixed track-and-trolley line. It has a short fall arrest distance and is ideal in areas with low ground clearance.
To reach complex machinery at power plants to industrial rooftops. To service railcars, ships, and trucks. Whether indoors or outdoors, the inherent flexibility of modular safety platforms brings worker safety and operational capabilities to new heights.
For uniquely challenging workstations and elevated storage areas, these customized platforms ensure that workers have safe, stable footing and full confidence in their freedom of movement to perform their tasks. They feature anti-slip surfaces, sturdy frames, and integrated guardrails. The modular design allows for easy installation, expansion, or relocation.
Platforms are routinely customized to include shop services, such as air, water, and electricity, and built with racks and shelves for efficient storage and use of tools and equipment. They can also be fabricated for adjustable height capability and fitted with heavy-duty locking casters for mobility.
These modular elements come together to create truly comprehensive fall protection systems that ensure consistent safety from the factory floor to elevated machinery. Crucially, these industrial safety solutions in Canada are designed and installed to meet rigorous regulatory standards.
Easy to customize, install, and reconfigure, modular systems are ideal for a wide range of industries and applications. They provide anti-slip surfaces and passive and active fall protection.
Modular Eastern Canada safety systems prevent accidents and injuries and build a foundation of safety that enhances operational efficiency by reducing downtime, lowering insurance costs, and fostering a culture where employees feel valued and protected.