You are visiting the Canada Kee Safety website from United States. Would you like to go to the United States site?
Obstacles on the roof can force workers to climb unsafely over them, often placing themselves at risk by walking too close to the roof edge. We’ll work closely with you to understand the path your workers take across the roof and complete fall protection assessment. This will enable us to propose the correct products to create a safe and efficient path across the rooftop.
Section 5(a)(1) of the Occupational Safety and Health Act, requires that each employer furnish to each of its employees a workplace that is free from recognized hazards that are causing or likely to cause death or serious physical harm.OSHA General Duty Clause
Each employee is protected from falling into a ladderway floor hole or ladderway platform hole by a guardrail system and toeboards erected on all exposed sides, except at the entrance to the hole, where a self-closing gate or an offset must be used.
Safety Requirements for areas where danger exists of persons or objects falling through floor or wall openings, platforms, runways, ramps and fixed stairs, in normal, temporary, and emergency conditions. Applies to industrial and workplace situations.
As fall protection experts, we can perform a critical analysis on your rooftop to identify the hazards where your workers are exposed to the greatest risk. This ensures that the most dangerous areas are protected immediately with state-of-the-art systems and OH&S compliant solutions.
Your rooftop assessment.
Recognize the hazards.
Nationwide network of certified integrators.
Exceed regulatory requirements.
Protect and maintain safety.
A truly comprehensive rooftop solution follows the Hierarchy of Fall Protection. An expert starts by inspecting the roof site for potential fall hazards. From there, a complete system solution and recommendations are created that descend down the four levels of the hierarchy, from simple, sensible approaches for eliminating risks all the way down to lifesaving personal protection systems.
Collective Systems require no additional training to use. Fall Restraint and Fall Arrest Systems both require a high level of user competency, training and additional inspection to be used properly.
See how our safety specialists created a comprehensive rooftop solution for our client.
Please fill in your details below and we’ll be in touch shortly.