Kee Safety

You are visiting the Canada Kee Safety website from United States. Would you like to go to the United States site?

Yes, take me to United States site
No, keep me on the Canada site

KeeGuard® Contractor Roof Railing

KeeGuard® Contractor is an upright, weighted roof guardrail that offers non-penetrating fall protection.

Overview Benefits Downloads FAQs Gallery Standards Case Studies

Guard your team from rooftop hazards

Our modular, free-standing railing system provides a permanent/temporary, safe and dependable barrier for the roof edge without penetrating the roof membrane. KeeGuard Contractor is versatile, easy to assemble, and gives you an innovative approach to durable portable railing systems for roofs up to a 5 degree pitch. In addition to these benefits, it’s OH&S compliant and third-party tested for reliability.
KS KGU 1823 1600

KeeGuard Contractor Benefits & Advantages

Roof edge protection

On a flat or low slope roof, a protected perimeter limits access to the leading edge. Installing a modular, free-standing railing system that does not penetrate the roof membrane provides a permanent, safe and dependable barrier for the roof edge.

Unique Base Design

The unique base weights are designed for quick assembly and disassembly when a temporary fall solution is needed. It can also be used in conjunction with permanent KeeGuard Standard when space limitations are an issue. KeeGuard Contractor is perfect for applications on roofs of up to 5 degree pitch.

Versatile and easy to install

There is no welding needed on-site, which means it can be installed with basic tools. Plus the components can be adapted to meet the unique design requirements of non-standard roof applications.

Key Features of KeeGuard Contractor

No roof penetrations

Suitable for use on concrete, asphalt, PVC, membrane and felt roof surfaces up 5 degrees.

OH&S Compliant

Exceeds Canada Occupational Safety and Health Regulations, SOR/86-304, Sections 12.01 to 12.09 for fall protection.

Modular design

It can be easily reconfigured on-site so you have the flexibility to make last minute adjustments.

Integrated toeboard

When toeboards need to be fitted KeeGuard Contractor can easily accommodate this.

Corrosion resistant

All iron fittings are galvanized to EN ISO 1461 so the system will last for years without corrosion.

200lbs design load

Even if an operator were to fall heavily against the guardrail they would be protected.

Fast installation

No welding, threading, or bolting is needed so there’s no need for a hot works permit.

Coated to match

The system can be powdercoated to match the facade color or any other color.

KeeGuard Contractor in the Workplace

See just how flexible our system is.

KS KGU 1824 Medium Copy
I have worked with Todd and Kee Safety on multiple projects. Knowledgeable, professional, and always eager to help. A great combination! ~ Kyle P.
Saputo Dairy, Sulphur Springs, TX

KeeGuard Downloads

Kee Safety Fall protection test center

Certified at our advanced testing facility

Kee Safety runs one of the world’s leading test and training centers at its global headquarters. Run by a team of industry experts, this state-of-the-art facility ensures that Kee Safety products meet the needs of its customers. Kee Safety is committed to driving new innovation with the purpose of separating people from hazards.

BG (1)

Get in touch with our sales staff

Frequently Asked Questions

    • Is KeeGuard required by law?
      Building owners and employers are responsible for protecting their workers from any hazard encountered while on the job. In jobs requiring access to roofs for maintenance purposes, fall protection is usually required if workers will be exposed to a fall hazard. Will installation of KeeGuard reduce insurance premiums? Insurance premiums are often impacted by steps taken by the building owner to reduce hazards to their workers. More importantly, building owners’ liability will be strictly examined if an industrial accident occurs and preventative measures (such as KeeGuard) were not taken.
    • Can the KeeGuard system be painted?
      KeeGuard components can be painted by the customer before or after installation. KeeGuard components are also available powder coated in any RAL color at the customer’s request (extra charges apply for powder coating). Powder coating takes place prior to shipment.
    • Can KeeGuard be used as an anchor?
      The KeeGuard system is not intended as an anchor and cannot be used as an anchor or tie off point to support any workers or equipment suspended off the roof.
    • Does the KeeGuard system comply with the current US and Canada safety regulations?
      The KeeGuard system has been tested to comply with and exceed US OSHA codes.
    • Does the KeeGuard system offer advantages over a horizontal life line system or harness system?
      Yes. KeeGuard Roof Edge Fall Protection Railing System is a passive, collective fall protection system that is preferred by safety consultants. Lives have been lost in work-related falls resulting from workers not using harnesses properly. The KeeGuard system removes the potential of that risk. Harness systems require training and proper and regular use. The embedded anchor for a harness system could later leak and cause costly water damage. The worry of not having enough harnesses for rooftop workers is eliminated.
    • Is KeeGuard more expensive than using a harness/tie-off system?
      When you consider the ongoing cost of training and system re-certification, the installed cost of KeeGuard is competitive with horizontal life line systems.
    • How do I buy the KeeGuard system?
      Each KeeGuard System is individually engineered for your premises. Contact us directly with the information on this website.

Product Gallery

Highest standards for off-the-ground safety

  • Federal [Canada] Canada Occupational Safety and Health Regulations, SOR/86-304, Sections 12.01 to 12.09
  • Alberta Occupational Health and Safety Code, 2009 Part 9, Fall Protection Sections 138 - 161
  • British Columbia Occupational Health and Safety Regulations, B.C. Reg. 296/97 Part 11, Fall Protection, Sections 11.1 to 11.10
  • Manitoba Workplace Safety and Health Regulation, Man. Reg. 217/2006 Part 14, Fall Protection, Sections 14.1 to 14.23
  • New Brunswick General Regulation -N.B. Reg. 91-191 Part VII, Protective Equipment, Sections 49 - 51
  • Newfoundland and Labrador Occupational Health and Safety Regulations, 2012, N.L.R. 5/12 Part X, Fall Protection, Sections 138 to 146
  • Northwest Territories Occupational Health and Safety Regulations, R-039-2015 Part 7, Personal Protective Equipment, Sections 103 to 109 and Part 9 Safeguards, storage, warning signs and signals, Sections 118 to 124
  • Nova Scotia Workplace Health and Safety Regulations, N.S. Reg. 52/2013 Part 21, Fall Protection, Sections 21.1 to 21.4
  • Nunavut General Safety Regulations, R.R.N.W.T. 1990, c. S-1, Part 7 Sections 104 to 109, and Part 9, Sections 118 to 122
  • Ontario Construction Projects, O. Reg. 213/91 Sections 26 - 26.9 and Industrial Establishments, R.R.O. 1990, Reg. 851 Section 85
  • Prince Edward Island Fall Protection Regulations, EC2004-633
  • Quebec Regulation respecting occupational health and safety, O.C. 885-2001
    Division XXX, Means and Equipment for Individual and Group Protection Sections 347 - 349.1 and
    Safety Code for the construction industry R.R.Q. 1981, c. S-2.1, r. 6 Division II, General Provisions Sections 2.9.1 to 2.9.3, Safety measures
  • Saskatchewan Occupational Health and Safety Regulations, 1996, R.R.S., C. O-1.1, R. 1 Sections 102 to 107, and Sections 116 to 116.3
  • Yukon Occupational Health and Safety Regulation, O.I.C. 2006/178 Protective Equipment and Clothing - Fall Arrest Sections 1.37 to 1.43
BG (1)

Discuss your needs with our specialists

travel restraint / rooftop fall protection / fall protection equipment / fall arrest equipment

Design and Installation

We offer full design and installation services that include a complete on-site survey. We also produce comprehensive CAD drawings to help you visualize the end result. With our detailed project outline, you can be confident that your project is professionally specified, and that all safety concerns and standards are addressed to your satisfaction.

Alternatively, you can spec and install KeeGuard yourself with our easy-to-follow instructions – it all starts with a call to our knowledgeable staff!

Get in touch
KeeGuard Roof Guardrail

Safety is Kee, let us help protect your team

Please fill in your details below and we’ll be in touch shortly.